Light Concrete Block Machine/Line

Introduction of Light Block/AAC Block: Autoclave Aerated Concrete Block (AAC Block) is the light and porous building material. It has the advantages of Light Weight, Keeping Temperature, Heat Resistant, Fireproof, High Intensity, Good Sound Insulation and Machinability, Conveniently Mechanized Construction, etc. AAC Block can be made into many different size of blocks (for example: 600×200×100, 600×200×125, 80×80×180, 240×115×53, etc), widely used for industry building and common house building. They are becoming more and more popular in the world, in the near future, they will completely replace the Clay Bricks and Normal Concrete Blocks in building construction. Light/AAC Block Machine Production Engineering: 1.First, dose and match measured raw materials2.After distributing, feed raw material into pouring mixer to make slurry3.Through thoroughly mixing, the slurry is poured to mould4.After pre-curing with a certain temperature & time, the block wouldreach certain hardness prepare for cutting5.Tilting hoister would turn over 90 degree of mould6.Then open the mould & separate it from block, take the block with side plate with cutting cart7.Theblock then be cut through the cutter firstly of two vertical sides of block8.Secondly the horizontal cutting9.Finally the vertical cutting10.After cutting, the block is hanged totrolley with side plate by semi-finished product hoister11.Organizing the cut blocks and put them intoautoclave12.Hardening the blocksunder certain temperature and pressure13.Take finished products out of autoclave14.The finished product hoister takes the finished product to stock shield15.Packed for loading16.The side plate return back by side plate roller17.Side plate would be organized with open mould18.Clean the mould and preparing for next pouring19.Steel bars processing line for slab production